TipNot is designed to securely and safely adhere to most household surfaces. Please make sure the surface of both the furniture and wall are both clean and dry before attaching your TipNot Furniture Anchor.

NOTE: We do recommend that you use rubbing alcohol as a cleaning solution prior to attaching your TipNot.

It’s easy. You can check the integrity of your TipNot Furniture Anchor by firmly tugging the furniture away from the wall to ensure proper adhesion of the TipNot Furniture Anchor.

No. It is not recommended that you attach your TipNot to any surface that is not entirely flat.

NO! TipNot Furniture Anchors should only be used as directed.

Absolutely not. TipNot Furniture Anchors can only be used once. If you remove a TipNot Furniture Anchor please discard it and DO NOT REUSE!

Still continue with the install of the TipNot Furniture Anchor per the instructions.  Once the anchor is installed you will want to check the integrity of your installation by tugging on the furniture to ensure proper adhesion of the anchor.

If adhesive seems faulty, discard TipNot Furniture Anchor immediately and install a brand new one.

Yes, we always recommend testing your TipNot Furniture Anchor periodically.

Using a safety pin or push pin, insert pointy end of the pin between the film and the adhesive, then pry up the edge of the film away from the adhesive.

No. We do not recommend the use of the TipNot Furniture Anchor on Wallpaper applications.

Yes, it is important.

Rarely. On occassion, a TipNot Furniture Anchor may cause a small of amount of paint to peel off during removal.

If your furniture is less than 36” wide use one TipNot Furniture Anchor.  Any furniture over 36” wide use two TipNot Furniture Anchors.

NOTE: SEE PRODUCT INSERT FOR MORE DETAILS